HRAP ANGLES

We produce high strength stainless steel HRAP Angles. Due to its high strength our angles are widely used in construction and structurals.

Size Tolerance ASTM A484
Length Minimum 3.00 meters to 6.70 meters or 10 feet to 22 feet
Length Tolerance Available in special cut to length bars in tolerance -0/+50 mm (-0/+2 inch)
Straightness 1mm/meter
Surface Finish Hot Rolled Annealed Pickled & Shot Blasted
Heat Treatment Solution Annealed

 

SIZE THICKNESS
20X20 ( 4/5" X 4/5") 3 (1/8")
25X25 (1" X 1") 3, 4, 5, 6 (1/8", 1/6", 3/16" , 1/4")
30X30 ( 1-1/6"X1-1/6") 3, 4, 5 (1/8", 1/6", 3/16")
32X32 (1-1/4"X1-1/4") 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4")
35X35(1-3/8"X1-3/8") 3, 4, 5 (1/8", 1/6", 3/16")
38.1X38.1(1-1/2"X1-1/2") 3.17, 4.76, 6.35 (1/8", 3/16", 1/4")
40X40(1-4/7"X1-4/7") 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4")
45X45(1-7/9"X1-7/9") 3, 4, 5, 6 (1/8", 1/6", 3/16", 1/4")
50X50(2"X2") 3, 4 , 5, 6,9.52 (1/8", 1/6", 3/16", 1/4",3/8")
60 X 60 (2-3/8" X 2-3/8") 5, 6,7,8 (3/16", 1/4")
63 X 63 (2-1/2" X 2-1/2") 5, 6,9.52 (3/16", 1/4",3/8")
65 X 65 (2-5/9" X 2-5/9") 5, 6,7,8 (3/16", 1/4")
70 X 70 (2-3/4" X 2-3/4") 6, 7, 8, 9, 10 (1/4", 9/32", 5/16", 3/8",2/5")
75 X 75 (3" X3") 6,7,8,9,10,12 (1/4",9/32",5/16",3/8",2/5",1/2")